| Standard |
Description |
File |
| 1910.305(j)(1)(iv) |
Electric cords and cables lying
in water. |
..\images\Elec13.jpg |
| 1910.303(g)(1)(iii) |
Access to circuit breaker panels
blocked. |
..\images\Elec15.jpg |
| |
Cartoon image |
..\images\elechaz.jpg |
| 1910.303(g)(2)(i) |
Broken electrical receptacle
exposing energized parts. |
..\images\Elect16.jpg |
| 1910.304(f)(5)(v) |
Portable light with metal guard
which is required to be grounded. |
..\images\Elect17.jpg |
| 1910.303(g)(2)(i) |
Live parts of 480 VAC electrical
system exposed. All live parts are required to be guarded. |
..\images\ELECT23.JPG |
| 1910.303(g)(2)(i) |
Front cover removed from circuit
breaker panel. Live parts exposed. |
..\images\ELECT26.JPG |
| 1910.254(d)(9)(iii) |
Welding lead cable splice were
not insulated. All splices and metal parts of cables and parts must be
guarded. |
..\images\NPS-009f.jpg |
| 1910.303(b)(1) |
Building wiring systems were not
properly installed. Wiring draped over building surfaces. |
..\images\SER-003.jpg |
| 1910.305(e)(1) |
Electrical systems were not
designed for wet and damp locations. |
..\images\SER-015.jpg |
| |
Electrical wiring and systems
were not installed IAW NEC. |
..\images\SER-018.jpg |
| 1910.305(a)(2)(iii)(G) |
Electrical wiring was not
protected from damage. Lying across road where cranes and other vehicular
traffic could pass over the wiring. |
..\images\SER-027.jpg |
| 1910.304(f)(5)(v) |
The ground pin was removed from
the electric plug. |
..\images\SER-028.jpg |
| 1910.307(b)(1) |
Electrical wiring was not
approved for hazardous locations. Paint spray area. |
..\images\Hazardouslocation.jpg |
