|
Description:
|
Hazard:
Employees climbed 130+' metal fixed ladder. Ladder not provided with ladder climbing device, offset landings every 20', or cage with a maximum length of 30'.
|
Description:
|
Hazard:
Ironworkers setting up crane outriggers did not utilize fall protection. Ironworkers are wearing full body harness with double lanyards. Both ends of lanyards are attach to harness.
|
Description:
|
Hazard:
Fixed ladder missing sections of protective cage.
|
|
Abatement:
|
Equip ladder with climbing device, offset landings every 20', or cage with a maximum length of 30'.
|
Abatement:
|
Employees on a working/walking surface with an unprotected side or edge more than 6 feet above the lower level shall be protected from falling by use of guardrail systems, safety net systems, or personal fall arrest systems.
|
Abatement:
|
Missing section of cage was replaced.
|
|
Description:
|
Hazard:
Ladder to work platform not of sufficient length.
|
Description:
|
Hazard:
Ladder to work platform not of sufficient length.
|
Description:
|
Properly installed stairway system to access equipment.
|
